Roland VC-1 D-50 - Manual (Page 35)

35
Transferring Patches To and From the D-50/550
10. Touch <OK> . The bulk dump starts. If you want to cancel without executing, touch <Cancel> .
11. When the data transfer is completed, the D-50’s display shows “ Complete .”
12. Press the [EXIT] button on the D-50 to return to the play mode.
In addition to the patches (64 patches), 16 reverb types (17–32 are also saved to the VC-1’s patch banks
(Pre 1–6, Int 1–8). Different reverb types 17–32 are saved to each patch bank. The reverb types you can
use vary with the selected patch as described below.
fig.04-06ae(ReverbTypeImage)
• All shared common reverb types (1–16) can be used.
• The reverb types 17–32 in individual banks can be used only
with the patches (64 patches) contained in that bank.
• Reverb types from a bank other than the internal banks (any
from 1 through 32) can be copied to a reverb type in the internal
banks (any from 17 through 32).
• This is convenient when, for example, you want to use Reverb
Type 25 (Gate Reverb) from the Patch Bank Pre 1 as Reverb
Type 30 in the Patch Bank Int 1 .
* Reverb Types (17–32) are transferred simultaneously with patch data
when patch data is transferred from the D-50 to the VC-1 (bulk loaded)
or from the VC-1 to the D-50 (bulk dumped).
fig.04-04(LCD_ModeMenu_DataTrans)
1. Press [MODE] on the VC-1. The MODE MENU window appears.
2. Touch <DATA TRANSFER> . The DATA TRANSFER screen
appears.
Copying a Reverb Type
1 2 3 4
5 6 7 8
9 10 11 12
13 14 15 16
Common
Reverb Type
(NOT rewritable)
17 18 19 20
21 22 23 24
25 26 27 28
29 30 31 32
Pre1
Reverb Type
(NOT rewritable)
17 18 19 20
21 22 23 24
25 26 27 28
29 30 31 32
Int1
Reverb Type
(rewritable)
Internal Bank Preset Bank
vc1_for_XT_e1 35 ページ ２００５年３月８日 火曜日 午後１２時５５分