Wg pitch, Tone partial pitch (p. 59), P. 59) – Roland VC-1 D-50 User Manual
Page 59
59
Tone Parameters
WG Pitch
fig.09-26(LCD_WgPitch)
Coars (Pitch Coarse)
Sets the standard pitch of a Partial in semi-tone steps. The
standard pitch is the pitch at C5 (middle C) key.
Value:
C1–C7
Fine (Pitch Fine)
The standard pitch can be altered over about +/- 50 cents.
Value:
-50–+50
fig.09-27e(PitchKeyFollow)
KF (Keyfollow (pitch))
Usually, the keyboard to a synthesizer assigns a semi-tone to
each key. This parameter can change the pitch ratio as show
below. The value represents how many octaves are changed
over 12 keys.
Value:
-1, -1/2, -1/4, 0, 1, 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 5/4,
3/2, 2, s1, s2
*
s1 or s2 may be selected for slightly stretching octaves.
s1:
Pitch 1 cent higher than one octave.
s2:
Pitch 5 cents higher than one octave.
WG PITCH
0
s2
s1
-1
-1/4
-1/2
1/8
1/4
3/8
1/2
5/8
3/4
7/8
1
5/4
3/2
2
1
0
-1
2
+3
Pitch
(Octave)
Middle C (C4)
vc1_for_XT_e1 59 ページ ２００５年３月８日 火曜日 午後１２時５５分