Roland VC-1 D-50 - Manual (Page 9)

9
Panel Descriptions
LCD CONTRAST Knob
Adjusts the display contrast.
Display
This displays information regarding the operation you are performing.
* The explanations in this manual include illustrations that depict what should typically be shown by the display.
Note, however, that your unit may incorporate a newer, enhanced version of the system (e.g., includes newer
sounds), so what you actually see in the display may not always match what appears in the manual.
E1–E8 knobs
These can be assigned a variety of the D-50’s different functions, allowing you to change the tone in real
time. (p. 16)
Dial and buttons
POWER Switch
Press to turn the power on/off. (p. 11)
Display Function
VALUE Dial
This is used to modify values. If you hold down [SHIFT] as you turn
the VALUE dial, the value will change in greater increments.
[DEC/-], [INC/+]
This is used to modify values. If you keep on holding down one button
while pressing the other, the value change accelerates. If you press one
of these buttons while holding down [SHIFT], the value will change in
bigger increments. (p. 44)
[ ], [ ], [ ], [ ] Moves the cursor location up/down/left/right. (p. 44)
[MODE] Opens the Mode Menu window.
[SHIFT]
This button is used in conjunction with other buttons to execute
various functions.
[EXIT]
Return to the PATCH TOP screen, or close the currently open window.
In some screens, this causes the currently executing function to be
aborted.
7
8
9
10
11
ON OFF
vc1_for_XT_e1 9 ページ ２００５年３月８日 火曜日 午後１２時５５分