Roland VC-1 D-50 - Manual (Page 36)

36
Transferring Patches To and From the D-50/550
fig.04-07(LCD_DataTrans_ReverbCopy)
3. Touch <REVERB COPY> in the left of the screen. The REVERB
COPY screen appears.
4. Modify the value by either turning the VALUE dial or pressing
[INC/+] or [DEC/-] .
Source Bank
Selects the source Patch Bank of Reverb Type.
Value: P1 – P6, I1 – I8
No.
Selects the source Reverb Type.
Value: 1 – 32
Destination Bank
Selects the destination Patch Bank of Reverb Type.
Value: I1 – I8
No.
Selects the destination Reverb Type.
Value: 17 – 32
5. Touch <OK> . The display will ask “Are You Sure?”, then touch <Execute> to execute the Reverb Copy
operation. If you want to cancel without executing, touch <Cancel> .
When the reverb copy is completed, the display shows “ Complete .”
vc1_for_XT_e1 36 ページ ２００５年３月８日 火曜日 午後１２時５５分