Roland VC-1 D-50 - Manual (Page 49)

49
Creating a Patch
Initialize means to return the settings of the currently selected patch to a standard set of values. The
Initialize operation will affect only the currently selected patch in temporary area; the patches that are
stored in internal memory and work area will not be affected. If you wish to restore all of the VC-1’s
settings to their factory values, perform a
Factory Reset (p. 28).
fig.08-09(Patch_Initialize)
1. Access the PATCH TOP screen, and select the patch that you wish
to initialize (p. 12).
2. Touch < > in the upper right of the screen. A pulldown menu
appears.
3. In the pulldown menu, touch <INITIALIZE> . The INITIALIZE
window appears.
fig.08-10(LCD_Initialiae)
4. Touch some buttons (checkbox) in the screen to select the object
you want to initialize (
✔ ).
<Check All>: Mark all object.
<PATCH FACTOR>: Patch factor settings. (p. 19)
<CTRL SETUP>: Control setup settings. (p. 19)
<COMMON>: Common parameter settings. (p. 50)
<PART-1>: Partial-1 parameter settings. (p. 56)
<PART-2>: Partial-2 parameter settings. (p. 56)
5. Touch <Execute> . The initialization will be carried out, and you’ll
be returned to the PATCH TOP screen.
Initializing Patch Settings
vc1_for_XT_e1 49 ページ ２００５年３月８日 火曜日 午後１２時５５分