Assigning parameters to the controllers, Time. (p. 16) – Roland VC-1 D-50 User Manual

Page 16

Advertising
background image

16

Applying Effects to the Sound

You can assign a variety of patch factors (p. 81), tone parameters (p. 82), and other settings to the V-Synth
XT’s complement of controller sections. This is referred to as the

Control Setup

. With intuitive editing of

sound sources with the knobs, you can use the D-50 in ways that go way beyond the original instrument.

1.

Access the

PATCH TOP

Screen.

2.

Touch

in the lower left of the screen. The

CTRL SETUP

window appears.

3.

When editing a parameter that requires you to specify a value, move the cursor to the value box of that
parameter. Then modify the value by either turning the

VALUE dial

or pressing

[INC/+]

or

[DEC/-]

.

Parameters marked by

can be controlled by specific CTRL Setup. For details on each parameter,

refer to the corresponding reference page.
The on-screen keys have the following functions.

Assigning Parameters to the Controllers

Controllers

Parameters

E1–E8 knobs

Patch Factor (p. 81)
Tone Parameters (p. 82)
Partial Parameters (p. 83)

Keys

Functions

Displays the parameters to be assigned
as a list.

Returns to the screen.

Restores the assigned parameters to their
original factory condition.

vc1_for_XT_e1 16 ページ 2005年3月8日 火曜日 午後12時55分

Advertising