Roland VC-1 D-50 - Manual (Page 89)

89
MIDI Implementation
2. Receive data
■
Channel Voice Messages
● Note off
Status 2nd byte 3rd byte
8nH kkH vvH
9nH kkH 00H
n = MIDI channel number: 0H - FH (ch.1 - 16)
kk = note number: 00H - 7FH (0 - 127)
vv = note off velocity: 00H - 7FH (0 - 127)
●
Note on
Status 2nd byte 3rd byte
9nH kkH vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
kk = note number: 00H - 7FH (0 - 127)
vv = note on velocity: 01H - 7FH (1 - 127)
● Control Change
m Bank Select (Controller number 0, 32)
Status 2nd byte 3rd byte
BnH 00H mmH
BnH 20H llH
n = MIDI channel number: 0H - FH (ch.1 - 16)
mm, ll = Bank number: 00 00H - 7F 7FH (bank.1 - bank.16384)
* Not received when the Bank Select Switch (SYSTEM MIDI) is OFF.
* The Patches corresponding to each Bank Select are as follows.
* The MSB value to be transmitted can be set individually for
* each patch using Tx Bank Select (PATCH MIDI).
* In this case, “0” is always output for the LSB.
❍ Modulation (Controller number 1)
Status 2nd byte 3rd byte
BnH 01H vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Modulation depth: 00H - 7FH (0 - 127)
❍ Portamento Time (Controller number 5)
Status 2nd byte 3rd byte
BnH 05H vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Portamento Time: 00H - 7FH (0 - 127)
❍ Data Entry (Controller number 6, 38)
Status 2nd byte 3rd byte
BnH 06H mmH
BnH 26H llH
n = MIDI channel number: 0H - FH (ch.1 - 16)
mm, ll = the value of the parameter specified by RPN/NRPN
mm = MSB, ll = LSB
❍ Volume (Controller number 7)
Status 2nd byte 3rd byte
BnH 07H vvH
n = MIDI channel number:0H - FH (ch.1 - 16)
vv = Volume:
00H - 7FH (0 - 127)
❍ Hold 1 (Controller number 64)
Status 2nd byte 3rd byte
BnH 40H vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127) 0-63 = OFF, 64-127 = ON
❍ Portamento Switch (Controller number 65)
Status 2nd byte 3rd byte
BnH 41H vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127)
0 - 63 = OFF, 64 - 127 = ON
❍ RPN MSB/LSB (Controller number 100, 101)
Status 2nd byte 3rd byte
BnH 65H mmH
BnH 64H llH
n = MIDI channel number: 0H - FH (ch.1 - 16)
mm = upper byte (MSB) of parameter number specified by RPN
ll = lower byte (LSB) of parameter number specified by RPN
BANK
SELECT
MSB LSB
PROGRAM
NUMBER
BATCH
BANK
PATCH
NUMBER
087
000 001 - 064 Internal 1 11 - 88
001 001 - 064 Internal 2 11 - 88
002 001 - 064 Internal 3 11 - 88
003 001 - 064 Internal 4 11 - 88
004 001 - 064 Internal 5 11 - 88
005 001 - 064 Internal 6 11 - 88
006 001 - 064 Internal 7 11 - 88
007 001 - 064 Internal 8 11 - 88
008 001 - 064 Preset 1 11 - 88
009 001 - 064 Preset 2 11 - 88
010 001 - 064 Preset 3 11 - 88
011 001 - 064 Preset 4 11 - 88
012 001 - 064 Preset 5 11 - 88
013 001 - 064 Preset 6 11 - 88
vc1_for_XT_e1 89 ページ ２００５年３月８日 火曜日 午後１２時５５分