Roland VC-1 D-50 - Manual (Page 56)

56
Tone Parameters
Balance (Chorus Balance)
This sets the volume balance of the chorus of the chorus sound
and normal sound.
Value: 0–100
fig.09-20a(LCD_LTonePartial1)
<FORM> : (p. 57)
<PITCH> : (p. 59)
<TVF> : (p. 61)
<TVA> : (p. 66)
<MOD> : (p. 69)
Partial Parameters
Value Balance
100 Only the chorus sound is heard.
50 Chorus sound = Normal sound
0 Only the normal sound is heard.
Restriction of the available parameters caused by Structure
Depending on what Structure (p. 50) is used, the available parameters may be different.
1. Some parameters included in a Partial that uses a PCM sound generator are invalid. The
mark is shown when the parameters apply even for PCM sounds.
2. With Ring Modulation, some parameters in Partial 2 will automatically become the same as
for Partial 1. Therefore, the values shown in the display are irrelevant with the actual values.
The mark is shown for such parameters.
vc1_for_XT_e1 56 ページ ２００５年３月８日 火曜日 午後１２時５５分