Roland VC-1 D-50 - Manual (Page 20)

20
Applying Effects to the Sound
SPLIT
The Split Point can be changed as follows.
Value: C2–C7
fig.05-14e
BALANCE (Tone Balance)
The volume balance of the Upper and the Lower Tone can be change.
Value: 0–100
CHASE (Chase Button)
Switches the Chase function on and off. Touch the button once to switch the function on; touch it again to
switch the function off again.
Value: OFF, ON
PORTAMENTO (Portamento Button)
Switches the Portamento function on and off. Portamento is a slide from one pitch to another, and is often
used for violin performance. Touch the button once to switch the function on; touch it again to switch the
function off again.
Value: OFF, ON
Display Description
WHOLE Upper Tone can be played in 16 voice polyphony
DUAL Both Upper and Lower Tones are played by each key in 8 voices polyphony.
SPLIT
The Split mode divides the keyboard into upper and lower sections, where two
different Tones can be played in 8 voices polyphony. That is, the VC-1 works like
two 8 voice synthesizers. The
Split Point (where the keyboard is divided into two
sections) is shown next to the Key Mode indication.
SEP
(Separate)
This mode is effective when an external MIDI device is controlling the VC-
1.(
“MIDI Implementation” (p. 88))
WHOL-S
(Whole Solo)
The Upper Tone is monophonic.
DUAL-S
(Dual Solo)
Both Upper and Lower Tones are monophonic.
SPL-US
(Split Upper Solo)
The Upper Tone is monophonic, and the Lower Tone is 8 voices polyphonic.
SPL-LS
(Split Lower Solo)
The Lower Tone is monophonic, and the Upper Tone is 8 voices polyphonic.
SEP-S
(Separate Solo)
This mode is effective when an external a MIDI device is controlling the VC-1.
(
“MIDI Implementation” (p. 88))
C2–B2 C3–B3 C4–B4 C5–B5 C6–B6 C7
(middle C)
vc1_for_XT_e1 20 ページ ２００５年３月８日 火曜日 午後１２時５５分