Roland VC-1 D-50 - Manual (Page 67)

67
Tone Parameters
TVA ENV (Envelope)
fig.09-42(LCD_TvaEnv)
Velo (Velocity Follow (Time 1))
Sets the sensitivity of the velocity than controls the Time 1 of the
TVA ENV. Increasing the sensitivity shortens Time 1, by stronger
playing.
Value: 0–4
fig.09-36(TimeKeyFollow)
TKF (Keyfollow (Time))
This can change the time o the TVA ENV depending on the key
played. 0 to 4 are valid. Higher values change the time more
drastically.
Value: 0–4
TVA ENV Time
An envelope curve is determined by times and levels.
fig.09-37e(TvaEnv)
fig.09-43(LCD_TvaEnvTime)
T1 (Time 1)
Sets the time needed to reach point 1 from the moment the key is
pressed.
Value: 0–100
T2 (Time 2)
Sets the time needed to reach point 2 from point 1.
Value: 0–100
T3 (Time 3)
Sets the time needed to reach point 3 from point 2.
Value: 0–100
T1 T2 T3 T4 T5
SusL L3 L2 L1
Point 1
Point 3
Point 4
Point 5
EndL
Point 2
Key On Key Off
vc1_for_XT_e1 67 ページ ２００５年３月８日 火曜日 午後１２時５５分