Tvf (time variant filter), Tone partial tvf (p. 61), P. 61) – Roland VC-1 D-50 User Manual
Page 61
61
Tone Parameters
TVF
fig.09-30(LCD_TVF/TVF)
fig.09-31e(CutoffFrequency)
Freq (Cutoff Frequency)
Sets the cutoff point of the TVF. As you lower the value, higher
frequencies are removed and the waveform gradually become an
approximation of a sine wave, then the sound will finally fade
out.
Value:
0–100
TVF (Time Variant Filter)
Bender Mode Example:
• If the Bender range is set to 12 (1 octave), and the Keyfollow (Pitch) of WG is set to 2, the
maximum pitch change caused by moving the Bender Lever is 2 octaves.
• When the Keyfollow (Pitch) of WG is set to zero, there is no pitch change caused by the
Bender lever.
Frequency
Le
v
e
l
Cutoff Point
Frequency
Le
v
e
l
Cutoff Point
Frequency
Le
v
e
l
Cutoff Point
Frequency
Le
v
e
l
0
100
V
alue
vc1_for_XT_e1 61 ページ ２００５年３月８日 火曜日 午後１２時５５分