Roland VC-1 D-50 - Manual (Page 19)

19
Applying Effects to the Sound
The Display shows several Factors at a time. If necessary, Scroll up or down the Display to find the Factor
to be edited. (Patch Parameters; p. 19)
fig.05-12(LCD_PatchEditControl)
1. Access the PATCH TOP Screen.
2. Touch <PATCH EDIT> at the bottom of the screen.
3. Touch one of the tabs in the left of the screen to select the desired
editing screen.
<CONTRL>: Control Edit, Portamento Edit (p. 21)
<OUTPUT>: Output Mode (p. 22)
<CHASE>: Chase Edit (p. 24)
<TONE TUNE>: Tone Tune (p. 25)
<MIDI>: MIDI function (p. 25)
4. When editing a parameter that requires you to specify a value,
move the cursor to the value box of that parameter. Then modify the value by either turning the
VALUE
dial or pressing [INC/+] or [DEC/-] .
5. Repeat steps 3–4 to set patch factors.
6. If you wish to save the changes you’ve made, perform the Save operation (p. 27). If you do not wish to
save changes, press
[EXIT] to return to the PATCH TOP screen. If you return to the PATCH TOP screen
without saving, the display will indicate “ EDITED ,” reminding you that the patch settings have been
modified.
* If you turn off the power or select a different patch while the display indicates “ EDITED ,” your edited patch will be
lost.
fig.05-13(LCD_PatchEditControl)
UPPER/LOWER (Tone Select Button)
You can select the tone to be controlled, upper tone, lower tone or
both tone.
KEY MODE
Key Mode refers to the Upper and Lower Tones are played on the
keyboard.
Value: WHOLE, DUAL, SPLIT, SEP, WHOL-S, DUAL-S, SPL-US,
SPL-LS, SEP-S
How to Make the Patch Factors
Settings Common to All Screens
vc1_for_XT_e1 19 ページ ２００５年３月８日 火曜日 午後１２時５５分