Roland VC-1 D-50 - Manual (Page 28)

28
Saving Patches You’ve Created
This restores all data in the VC-1 to the factory-set condition (Factory Reset).
If there is important data you’ve created that’s stored, all such data is discarded when a Factory Reset is
performed. If you want to keep the existing data, save it as describe below.
• Transmit it to an original D-50 (or an external MIDI device), and save it (p. 33).
• Transmit it to a PC using V-Synth XT USB function, and save it.
* For details on V-Synth XT USB function, refer to the V-Synth XT owner's manual.
1. Press [MODE] . The MODE MENU window appears.
2. Touch <FACTORY RESET> . The Factory Reset screen appears.
fig.08-11(ModeMenu)
3. Touch <OK>
4. Touch <Execute> to execute the Factory Reset. When the display indicates “ Completed! ,” the factory
reset operation has been completed.
Reset to Default Factory Settings
The VC-1’s File Structure
As seen from your computer, the VC-1’s file structure is as follows.
fig.11-09e(Vc1FileStructure)
• You can use the computer to copy (back up) these files to
the computer (e.g., the hard disk).
• Do not perform operations on your computer to erase
(format) or rename these folders or files.
System Parameter
Patches of Internal Bank
vc1_for_XT_e1 28 ページ ２００５年３月８日 火曜日 午後１２時５５分