Roland VC-1 D-50 - Manual (Page 22)

22
Applying Effects to the Sound
The Output Mode determines how the Tones take on the reverb effect, and how the Tones appear at the
outputs.
A sound reverberated in an acoustic environment consists of three parts. First, you hear the direct sound
as it travels from the source outward. Next the early reflection resounds once, or several time, from the
walls, ceiling ,and floor. Finally, you hear the reverberated sound as it reflects many times in the
environment.
fig.05-16e(LCD_PatchEditControl/Output)
Mode (Output Mode)
Selects one of the following four output modes.
Value: 1–4
OUTPUT (Output Mode)
Display Function
Stereo reverb works on the mixed sound of Upper and Lower Tones, and id
sent out in stereo.
The Mixture of Upper and Lower takes on stereo reverb, and the direct sound
is sent out separately for Upper and Lower.
Only the Upper Tone takes on reverb. Upper and lower Tones are sent out
separately.
Only the Lower Tone takes on reverb, Upper and Lower Tones are sent out
separately.
Sound Generator Listener
Direct Sound
Reverb Sound
vc1_for_XT_e1 22 ページ ２００５年３月８日 火曜日 午後１２時５５分