Roland VC-1 D-50 - Manual (Page 41)

41
Overview of the VC-1
Depending on which generators are selected in the Partial Block , greatly different Tone Parameters will
be used. Some Tone Parameters used for the Synthesizer sound generators are irrelevant to the PCM
generator. In a Structure with
Ring modulation , some parameters of Partial 2 are automatically set to
those of Partial 1.
fig.07-09(ToneParam)
WG (Wave Generator)
In the WG (Wave Generator), the pitch and waveform are controlled.
Pitch
The basic pitch of a Partial (sound generator) can be set here. The pitch is a Common parameter, and is
therefore controlled by P-ENV and LFO-1 .
Waveform, PCM Wave Number
This selects the waveform of the sound source. When a synthesizer sound generator is selected, the
waveform can be controlled by the Pulse Width controls.
Pulse Width
This changes the waveform of the sound source. The pulse width is controlled by any LFO (= Common
parameter).
Structure of Tone Parameters
Level 6
TVA ENV 9
WG TVF TVA
Pitch 1 Waveform 2
Resonance 5
Cutoff
Frequency
4
TVF ENV 8
Partial (Synthesizer Sound Generator)
Level 6
TVA ENV 9
WG TVA
Pitch 1
PCM Wave
Number
2
Partial (PCM Sound Generator)
7 P-ENV
Pulse
Width
3
10 LFO-1 11 LFO-2 12 LFO-3
1
2
3
vc1_for_XT_e1 41 ページ ２００５年３月８日 火曜日 午後１２時５５分