Roland VC-1 D-50 - Manual (Page 74)

74
Settings for the Entire VC-1
Exclusive (Exclusive Switch)
To receive or transmit Exclusive messages (Roland ID Number only), set this to On , P-Dump or TxEdit .
Value: Off, On, P-Dump, TxEdit
* When set to P-Dump , the Patch you select is transmitted to an external device. However, it cannot be transmitted
by Patch Shift with the pedal switch, or by patch selection with the Program Change messages sent from an external
device.
Bank.S (Bank Select Switch)
To receive or transmit Bank Select messages, set this to On .
Value: Off, On
Display Function
On Normally.
P-Dump The patch data that you select is transmitted.
TxEDIT The parameter data that you edited is transmitted.
vc1_for_XT_e1 74 ページ ２００５年３月８日 火曜日 午後１２時５５分