Roland ATELIER AT-500 - Manual (Page 103)

101
Using the Registration Buttons
Using the Registration Buttons
When saving Registration sets, names like “Factory Reg.” will be assigned by
default, but you can assign a name that will help you later to identify the
contents of the Registration set.
1.
Touch <Registration> on the Main screen.
The Registration Load screen appears.
fig.03-05.eps
2.
Touch <go to Save>.
The Registration Save screen appears.
fig.03-09-3.eps
3.
Touch < > (Utility).
The Utility screen appears.
fig.03-10-2.eps
Assigning a Name to a Registration Set
You can also open the
Registration Load screen by
pressing the [Registration]
button on the panel.
AT-500_e.book 101 ページ ２００８年７月２８日 月曜日 午後４時１７分