Roland ATELIER AT-500 User Manual
Page 36
34
Convenient Functions
4.
Touch <
> once again to stop playback of the demo
song.
5.
Press the [Demo] button to exit the demonstration screen.
If the following screen appears
If the performance song in the unit has not been saved to the
“Favorites” (User memory) or USB memory, the following message
appears, and it will not be possible to play the Demo songs.
fig.E-62.eps
If you do not want to delete the performance data, touch
<Cancel>.
1.
If you want to delete the performance data,
touch <OK>.
The performance data can be
saved on the “Favorites” (User
memory) or USB memory. If you
wish to save the performance
data to the “Favorites” or USB
memory, refer to “Saving
Performance Songs” (p. 169).
NOTE
All rights reserved.
Unauthorized use of this
material for purposes other than
private, personal enjoyment is
a violation of applicable laws.
NOTE
The data for the Demo song
that is being played is not
available at the MIDI Out
connector.
AT-500_e.book 34 ページ ２００８年７月２８日 月曜日 午後４時１７分