Roland ATELIER AT-500 - Manual (Page 72)

70
Selecting and Playing Sounds
You can have Lower voice continue to sound after you release you fingers
from the keys, until the next key is played.
1.
Hold down the Pedal [To Lower] button for several seconds
until its indicator begins blinking.
fig.02-14_AT-900.eps
The following message appears.
The notes played on the lower keyboard will continue sounding.
2.
Press the Pedal [To Lower] button so its indicator goes out.
The sound that was being sustained will stop, and the instrument will return to
the normal playing state.
Sustaining Notes in the Lower Part (Lower Voice Hold)
The Pedal [To Lower] button is
ON simultaneously.
AT-500_e.book 70 ページ ２００８年７月２８日 月曜日 午後４時１７分