Roland ATELIER AT-500 - Manual (Page 202)

200
Various Other Settings
Function During Playback
You can specify whether or not the Expression Pedal will
function while ATELIER song files are being played back.
1. Touch <Sound/KBD> on the Main screen.
The Sound/Keyboard screen appears.
2. Touch <Controller>.
The Controller screen appears.
3. Touch < > < > to display the Exp. Src
(Play).
fig.09-10.eps
4. Touch the Exp. Src (Play) setting.
fig.09-12.eps
5. Touch < > < > to change the setting.
6. Touch <Exit>.
This setting determines which keyboard will be controlled by
the Pitch Bend/Vibrato lever.
1. Touch <Sound/KBD> on the Main screen.
The Sound/Keyboard screen appears.
2. Touch <Controller>.
The Controller screen appears.
3. Touch < > < > to display the Bender/
Vibrato.
fig.09-10.eps
4. Touch the Bender/Vibrato setting.
fig.09-13.eps
5. Touch < > < > to change the setting.
6. Touch <Exit>.
Setting Description
PEDAL
+COMPOSER
The Expression Pedal will function.
Expression Pedal recording within the song
file will also be effective.
COMPOSER
The Expression Pedal will not function. The
Expression Pedal recording within the song
file will be effective.
PEDAL
The Expression Pedal will function. The
Expression Pedal recording within the song
file will be ignored.
Choosing the Keyboard for which Pitch
Bend and Vibrato will Apply
Setting Description
to UPPER
The effect is applied to the voices played on the
Upper keyboard.
to LOWER
The effect is applied to the voices played on the
Lower keyboard.
to PEDAL
The effect is applied to the voices played on the
Pedalboard.
AT-500_e.book 200 ページ ２００８年７月２８日 月曜日 午後４時１７分