Opening/closing the lid, Connecting the power cord, Opening/closing the lid connecting the power cord – Roland ATELIER AT-500 User Manual

Page 23

Advertising
background image

21

Before You Start Playing

Before You Start Playing

fig.00-22.eps

1.

To open the lid, hold it with both hands and
slide it to the rear.

2.

To close the lid, slowly pull it forward until it
stops.

Be careful not to get your fingers caught when opening or
closing the lid. Adult supervision is recommended when
small children are going to be using the instrument.

To prevent accidents, be sure to close the lid before moving
the organ.

Make sure you don’t have anything (such as sheet music) on
the keyboard when you close the lid.

1.

First, make sure that the [Power On] switch at
the panel’s left side is OFF (not pushed in).

fig. 00-27.eps,fig.00-27-2.eps

2.

Connect the supplied power cord to the AC
Inlet connector, then plug the other end into an
AC outlet.

Only use the power cord supplied with this instrument.

Whenever you do not intend to use the instrument for
extended periods of time, pull out the power cord from the
AC outlet.

Opening/Closing the Lid

NOTE

NOTE

NOTE

Connecting the Power Cord

OFF

Upper position

Power Cord

AC Outlet

NOTE

NOTE

AT-500_e.book 21 ページ 2008年7月28日 月曜日 午後4時17分

Advertising