Roland ATELIER AT-500 - Manual (Page 210)

208
Various Other Settings
You can choose one of 4 different sounds for the metronome.
1. Touch <Rec/Play> on the Main screen.
The Rec/Play screen appears.
2. Touch < > (Utility).
The Utility screen appears.
3. Touch <Options>.
The Rec/Play Options screen appears.
4. Touch < > < > to display the Metronome
Sound.
fig.09-19.eps
5. Touch the Metronome Sound setting.
fig.09-21.eps
6. Touch < > < > to change the setting.
7. Touch <Exit>.
This setting remains stored in memory even while power is
turned off.
This setting determines the beat to be used when recording
performance songs.
1. Touch <Rec/Play> on the Main screen.
The Rec/Play screen appears.
2. Touch < > (Utility).
The Utility screen appears.
3. Touch <Options>.
The Rec/Play Options screen appears.
4. Touch < > < > to display the Beat.
fig.09-19.eps
5. Touch the Beat setting.
The time signature setting screen appears.
fig.09-19-2.eps
6. Touch the time signature that you wish to set.
7. Touch <Exit>.
If you’re using Rhythm performance or Automatic
Accompaniment, the time signature will be specified
automatically.
You cannot change the beat of previously recorded songs.
Changing the Sound of the Metronome
Setting Description
CLICK&BELL Conventional metronome sound
ELECTRONIC Electronic metronome sound
VOICE ENG. Human voice (English)
VOICE JPN. Human voice (Japanese)
Setting the Beat
NOTE
AT-500_e.book 208 ページ ２００８年７月２８日 月曜日 午後４時１７分