Roland ATELIER AT-500 - Manual (Page 209)

207
Various Other Settings
Various Other Settings
You can change the way in which the metronome will sound.
1. Touch <Rec/Play> on the Main screen.
The Rec/Play screen appears.
2. Touch < > (Utility).
The Utility screen appears.
3. Touch <Options>.
The Rec/Play Options screen appears.
4. Touch < > < > to display the Metronome.
fig.09-16.eps
5. Touch the Metronome setting.
fig.09-18.eps
6. Touch < > < > to change the setting.
7. Touch <Exit>.
You can adjust the volume of the metronome.
1. Touch <Rec/Play> on the Main screen.
The Rec/Play screen appears.
2. Touch < > (Utility).
The Utility screen appears.
3. Touch <Options>.
The Rec/Play Options screen appears.
4. Touch < > < > to display the Metronome
Vol (Metronome Volume).
fig.09-19.eps
5. Touch Metronome Vol. setting.
fig.09-20.eps
6. Touch < > < > to change the setting.
Increasing the value will raise the volume of the
metronome.
7. Touch <Exit>.
Changing the Metronome Setting
Setting Description
OFF Not heard at all
REC Heard only while recording
ON Heard constantly
Adjusting the Metronome Volume
Setting
1–10
AT-500_e.book 207 ページ ２００８年７月２８日 月曜日 午後４時１７分