Roland ATELIER AT-500 - Manual (Page 107)

105
Using the Registration Buttons
Using the Registration Buttons
If the following screen appears
If you select a number at which a Registration has already been saved and
touch <Save>, the following screen appears.
fig.E-63.eps
If you wish to update the contents of the Registration data
1.
Touch <OK>.
If you wish to save new data instead of updating the Registration
1.
Touch <Cancel>.
Rewriting of the Registration will be canceled.
2.
In the Registration Save screen, select the number that is
displayed as “-----” (a number that currently does not
contain Registration data).
3.
Touch <Save> (p. 103).
When saving is complete, the saved Registration name will be displayed.
To create a folder, refer to
“Creating a Folder” (p. 44)
Saving Registrations in a folder
1. Carry out steps 1 through 4 of “Saving Registration Sets” (p. 103).
2. Touch < > < > to select a folder.
3. Touch the folder namve.
The Registrations in the folder will be displayed.
4. Carry out steps 5 through 8 of “Saving Registration Sets”(p. 104).
To exit the folder
1. Touch < > < > to select “Up.”
2. Touch the “Up” indication.
AT-500_e.book 105 ページ ２００８年７月２８日 月曜日 午後４時１７分