Roland ATELIER AT-500 - Manual (Page 123)

121
Using the Performance Functions
Using the Performance Functions
You can select any of the following functions and assign them
to either Foot Switch on the right or left side of the Expression
Pedal.
1. Touch <Sound/KBD> on the Main screen.
The Sound/Keyboard screen appears.
2. Touch <Controller>.
The Controller screen appears.
3. Touch < > < > to display the L Foot Switch
or R Foot Switch.
fig.09-08.eps
4. Touch <L Foot Switch> or <R Foot Switch>
setting.
fig.09-09.eps
5. Touch < > < > to change the setting.
6. Touch <Exit>.
If the “Registration Shift” setting is “RIGHT,” “LEFT,” or
“RIGHT + Load next,” the Foot Switch will be dedicated to
switching through the Registrations, and the “R Foot Switch”
or “L Foot Switch” setting will be ignored (p. 122).
Changing the Function of the Foot
Switch
NOTE
Available functions Description
ROTARY FAST/SLOW
Switch the Rotary speed between
“FAST” and “SLOW.”
GLIDE
While the Foot Switch is pressed,
the pitch will temporarily be
lowered, and will gradually return
to normal when you release the
Foot Switch. When the power is
turned on, Glide effect is added to
the voice of all the sections being
played on Upper keyboard.
LEADING BASS
The Leading Bass function (p. 82)
will operate only while you
continue pressing the Foot Switch.
RHYTHM START/STP Start/Stop the Rhythm.
COMP PLAY/STOP
The same function as the
Composer [Play/Stop] button.
Each time you press the Foot
Switch, the performance data will
play back or stop.
INTRO/ENDING Play an Intro or Ending.
VARIATION UP
Switches the Variation button.
Each time you press the foot
switch, the Variation number will
increment.
VARIATION DOWN
Switches the Variation button.
Each time you press the foot
switch, the Variation number will
decrement.
VARIATION ALT.
Switches the Variation button.
If the Variation [1] button or [3]
button is selected, this will switch
between the Variation [1] and [3]
buttons.
If the Variation [2] button or [4]
button is selected, this will switch
between the Variation [2] and [4]
buttons.
FILL IN Adds a fill-in.
BREAK
Stop the Rhythm at the end of that
measure.
DAMPER OF UPPER
Notes played on the Upper
keyboard will be sustained only
while you continue pressing the
Foot Switch.
DAMPER OF LOWER
Notes played on the Lower
keyboard will be sustained only
while you continue pressing the
Foot Switch.
OFF Turns the foot switch function off.
AT-500_e.book 121 ページ ２００８年７月２８日 月曜日 午後４時１７分