Roland ATELIER AT-500 - Manual (Page 51)

49
Selecting and Playing Sounds
Selecting and Playing Sounds
Press the buttons of the various parts of “Pedal” to select voices.
Immediately after the power is turned on, the Pedal Bass voice will sound
single notes using the “Organ Bass1” voice.
Example: Select “Str.Bass Pdl” for the Pedal part
fig.01-09.eps
1.
Press the Pedal [String] button (indicator lights).
The name of the selected voice appears in the display for several seconds.
fig.01-10.eps
Now when you play the Pedalboard, “Str.Bass Pdl” (String Bass Pedal) will be
heard.
Selecting Pedal Bass Voice
1
Normally, playing the
pedalboard will sound one note
at a time. Settings can be
adjusted to allow multiple notes
to be played on the Pedalboard
(p. 198).
If you press the Pedal [To
Lower] button (indicator lights)
or “Bass Split” is “ON,” the
Pedal Bass voice can now be
played by the Lower keyboard,
not by the Pedalboard.
For details refer to “Using the
Lower Keyboard to Play the
Bass Voice (Bass Split)” (p.
149) or “Using the Lower
Keyboard to Play the Bass
Voice (Pedal [To Lower]
Button)” (p. 152).
AT-500_e.book 49 ページ ２００８年７月２８日 月曜日 午後４時１７分