Roland ATELIER AT-500 - Manual (Page 248)

246
Troubleshooting
-
-
Song does not Play Correctly
Problem Check Solution Page
The volume changes during
playback of performance data
When recording is performed
repeatedly while changing the Part
Balance volume, the previously-
recorded Part Balance data remains in
the Control track.
If you wish to get rid of the volume
changes, use the Erase function to delete
the Part Balance data.
p. 182
Certain instrument are not heard
while playing a song
The track is muted. Turn off track muting.
p. 157
p. 159
Recording is not Possible
Problem Check Solution Page
Recording is not possible
(If you wish to erase a previously-
recorded track and then re-
record.)
Press the track button for the desired
track to make that button blink before
you begin recording. Press the track button for the desired track
to make that button indicator blink before
you begin recording.
p. 166
Touch the track button for the track you
want to record in the Rec/Play screen,
stopping the button from flashing.
On Rec/Play screen, touch the track
button for the desired track to make that
button indicator blink before you begin
recording.
p. 166
The recorded performance has
disappeared
Any performance that has been
recorded is deleted when the power to
the unit is turned off.
It is not possible to recover performance
data that has been lost.
Before you turn off the power, save the
performance data in the Favorites (user
memory), USB memory, or a floppy disk.
p. 169
Problems with Playback Functions
Problem Check Solution Page
Moving your hand over the D
Beam controller does not produce
a sound
If a D Beam button is lit in red, moving
your hand above the D Beam controller
will apply an effect to the sound you
play from the keyboard.
Press the D Beam button once again so
the button is lit in green.
p. 142
Expression Pedal does not
operate
The function of the Expression Pedal
during recording or the function during
playback has been set to
“COMPOSER.” Set the expression pedal function during
recording to “PEDAL,” and during
playback to “PEDAL” or
“PEDAL+COMPOSER.”
p. 199
Can’t use the function assigned to
the foot switch
If “Registration Shift” (change
Registrations) is “RIGHT,” “LEFT,” or
“RIGHT + Load Next,” the foot switch
will be dedicated to switching the
Registration.
Set “Registration Shift” to “OFF.” p. 122
AT-500_e.book 246 ページ ２００８年７月２８日 月曜日 午後４時１７分