Roland ATELIER AT-500 - Manual (Page 200)

198
Various Other Settings
This adjusts the amount of the Initial Touch effect applied.
Initial Touch is a function that translates the force used in
playing the keys into a directly proportional amount of volume.
1. Touch <Sound/KBD> on the Main screen.
The Sound/Keyboard screen appears.
2. Touch either <Upper>, or <Lower>.
3. Touch < > < > to display the Initial Touch.
fig.09-03.eps
4. Touch the Initial Touch value (OFF, 1–10).
5. Touch < > < > to edit the value.
6. Touch <Exit>.
You can set the Bass Pedalboard to play simultaneous multiple
notes or single notes only.
1. Touch <Sound/KBD> on the Main screen.
The Sound/Keyboard screen appears.
2. Touch <Pedal>.
The Pedalboard screen appears.
3. Touch < > < > to display the PedalBass
Mode.
fig.09-04.eps
4. Touch the PedalBass Mode setting to switch
between “MONOPHONIC” and
“POLYPHONIC.”
Each time you touch the PedalBass Mode setting, it will
alternate between “MONOPHONIC” and
“POLYPHONIC.”
5. Touch <Exit>.
Adjusting How the Instrument
Responds
Adjusting the Initial Touch Sensitivity
Setting Description
Upper
To change the initial touch setting of the
Upper part
Lower
To change the initial touch setting of the
Lower part
Setting Description
1–10
Initial Touch is on.
Striking the keys more forcefully will produce
correspondingly louder sounds.
The change in volume when the keys are
played forcefully increases as the value is
increased.
OFF
Initial Touch is off.
Volume remains constant regardless of how
hard you play.
Changing the Pedalboard Polyphony
Setting Description
MONOPHONIC Only single notes can be played.
POLYPHONIC Multiple notes can be played.
AT-500_e.book 198 ページ ２００８年７月２８日 月曜日 午後４時１７分