Adding reverberation to the sound (reverb effect) – Roland ATELIER AT-500 User Manual
Page 138
136
Applying Various Effects to the Sound
Reverb is an effect that adds a sense of spaciousness to the sound, creating
the illusion of playing in a large or small concert hall, a large or small room,
a small club, etc.
fig.05-16-1.eps
1.
Press the Reverb [
▲
] or [
▼
] buttons to adjust the overall
Reverb amount.
When you press the up button [
▲
], additional Reverb is applied. Pressing the
down button [
▼
] decreases the Reverb level. If none of the Reverb indicators
are lit, the Reverb effect will not be heard.
When you press the Reverb [
▲
] [
▼
] buttons, the Part Balance Monitor screen
appears. In the Part Balance Monitor screen you can check the reverb depth.
fig.01-27.eps
Adding Reverberation to the Sound (Reverb Effect)
The Part Balance Monitor
screen is displayed for several
seconds and then closes
automatically.
If you touch <Hold>, the screen
continues to be displayed until
you touch <Exit> again.
AT-500_e.book 136 ページ ２００８年７月２８日 月曜日 午後４時１７分