Roland ATELIER AT-500 - Manual (Page 229)

227
Connecting with External Device
Connecting with External Device
The functions of the jacks on the bottom of the keyboard are described below.
1.
Output Main L/Mono, R Jacks
These jacks can be connected to your audio system to
enjoy more powerful sound.
2.
Input L/Mono, R Jacks
Using these jacks, you can connect other sound
generating devices or audio equipment and play sounds
from other devices through the ATELIER’s speaker.
3.
RGB Out Connector → p. 232
You can connect an external display here to view a
slideshow.
4.
Phones Jacks → p. 23
Connect headphones here.
5.
Mic Volume Knob → p. 23
This adjusts the volume when a microphone is
connected.
6.
Mic Jack → p. 23
Connect microphone here.
7.
MIDI Out/In Connectors → p. 231
You can connect external MIDI devices to the ATELIER
and exchange performance data between them.
8.
USB Connector → p. 229
Used for connecting a computer to the ATELIER using a USB
cable
.
Name and Functions of Jack and Connectors
1 2 3
4 5 6 8 7
AT-500_e.book 227 ページ ２００８年７月２８日 月曜日 午後４時１７分