Roland ATELIER AT-500 - Manual (Page 112)

110
Using the Registration Buttons
Here’s how to delete a Registration set that was saved to a USB memory, User
memory (p. 218), or floppy disk.
1.
Prepare the Registration that you want to delete.
If you want to delete Registration data from the USB memory, connect the USB
memory to the External Memory connector.
If you want to delete Registration data from the floppy disk, connect the floppy
disk drive to the Ext Drive connector. Into the floppy disk drive, insert a floppy
disk.
2.
Touch <Registration> on the Main screen.
The Registration Load screen appears.
3.
Touch <File>.
The Registration File Edit screen appears.
fig.03-25.eps
Deleting a Set of Registrations
Button Meaning Description
Rename Modify the name
The Rename screen appears. You can
touch the screen and rename the selected
Registration (p. 101).
Up
Change the order
(upward) The selected Registration will be moved
earlier in the order (p. 112).
Down
Change the order
(downward) The selected Registration will be moved
later in the order (p. 112).
Delete Delete the Registration The selected Registration will be deleted.
Create Create new folder A new folder will be created.
Copy
Copies the
Registration
You can copy Registration from USB
memory to user memory, or copy
Registration from user memory to USB
memory (p. 114).
You can also open the
Registration Load screen by
pressing the [Registration]
button on the panel.
AT-500_e.book 110 ページ ２００８年７月２８日 月曜日 午後４時１７分