Roland ATELIER AT-500 - Manual (Page 141)

139
Applying Various Effects to the Sound
Applying Various Effects to the Sound
You can specify the reverb depth for each part.
To adjust the reverb depth for Upper/
Lower/Pedal/Solo
1. Touch <Sound/KBD> on the Main screen.
ffig.05-08.eps
The Sound/Keyboard screen appears.
fig.VoiceList.eps
2. Touch <Upper>, <Lower>, or <Pedal>.
3. Touch < > < > to display the Reverb
Depth.
fig.05-17.eps
You can open the Pedalboard screen, Lower Keyboard
screen, or Upper Keyboard screen with touching <Pedal>,
<Lower>, and <Upper>.
4. Touch the part whose reverb depth you wish
to adjust.
The following screen appears.
fig.05-20.eps
5. Touch < > < > to adjust the setting.
6. Touch <Exit>.
Changing the Depth of the Reverb
Menu Part whose reverb length you wish to change
Upper Upper part, Solo part
Lower Lower part
Pedal Pedal part
Setting
0–10
AT-500_e.book 139 ページ ２００８年７月２８日 月曜日 午後４時１７分