Roland ATELIER AT-500 - Manual (Page 211)

209
Various Other Settings
Various Other Settings
The ATELIER may be unable to correctly recognize the type of
CD being used. In such instances, you can specify the type of
CD manually.
1. Touch <Rec/Play> on the Main screen.
The Rec/Play screen appears.
2. Touch < > (Utility).
The Utility screen appears.
3. Touch <Options>.
The Rec/Play Options screen appears.
4. Touch < > < > to display the CD/Audio
Type.
fig.09-16.eps
5. Touch the CD/Audio Type setting.
fig.09-18.eps
6. Touch < > < > to change the setting.
Note that certain commercially available CDs cannot be
played back on the
ATELIER .
7. Touch <Exit>.
Setting the Type of CD To Be Played
Back
Setting Description
Auto The CD type is detected automatically.
Type A
General CDs for Player Piano contain audio
and MIDI data, and the data format may vary
from one CD to the next. If the CD’s data
format does not match the ATELIER’s settings,
a “beep” will sound.
Type B
STEREO
Commercial Audio CD (CDs other than those
designed for use with the piano player piano)
NOTE
AT-500_e.book 209 ページ ２００８年７月２８日 月曜日 午後４時１７分