Roland ATELIER AT-500 - Manual (Page 139)

137
Applying Various Effects to the Sound
Applying Various Effects to the Sound
By changing the reverberations of the notes, you can enjoy the
atmosphere of performance in a wide variety of different
locations.
1. Touch <Sound/KBD> on the Main screen.
fig.05-08.eps
The Sound/Keyboard screen appears.
fig.VoiceList.eps
2. Touch <Effect>.
The Effect screen appears.
fig.05-17.eps
3. Touch < > < > to display the Reverb Type.
4. Touch the value setting buttons for Reverb
Type to adjust the setting.
The following screen appears.
fig.05-18.eps
5. Touch < > < > to change the setting.
It is not possible to modify the delay time (delay interval)
when “DELAY” or “PAN DELAY” is selected.
6. Touch <Exit>.
Changing the Reverb Type
Display Description
ROOM 1 Simulates the reverb of a conference room
ROOM 2
Simulates the reverb of a performance
lounge
ROOM 3
Simulates the reverb of a large, open
room
HALL 1
Simulates the reverb of a large concert
hall
HALL 2
Simulates the reverb of a small concert
hall
SMALL CHURCH The reverberation of a small church
LARGE CHURCH The reverberation of a large church
CATHEDRAL The reverberation of a cathedral
PLATE Applies a bright, metallic reverb
DELAY An echo-like sound repeated several times
PAN DELAY
Similarly to the above but where the
sound is panned between the left and
right speakers
NOTE
AT-500_e.book 137 ページ ２００８年７月２８日 月曜日 午後４時１７分