Roland ATELIER AT-500 - Manual (Page 106)

104
Using the Registration Buttons
5.
Touch < > < > in the screen to select the save-
destination number.
Numbers which have not been used in the saving operation will be displayed
as “- - - - -.”
fig.03-09-2.eps
To cancel the Save operation, touch <Exit> to close the Registration Save
screen.
6.
Touch <Save>.
The Save Format screen appears.
fig.03-14.eps
7.
Touch <Original> or <R-Series>.
8.
Touch <OK>.
Saving of the Registration data will begin.
When saving ends, the “- - - - -” in the screen will change to the Registration
name that you saved.
If you’ve named the Registration, it will be saved with that name.
Settings Description
Original
Save formats that can be used with the AT-900, AT-900C, AT-800,
AT-500, AT-300, AT-100 and AT-75 when saved in this format, the
data can also be used by AT-SL Series, AT-45, AT-15 and AT-S
Series devices.
R-Series Save formats that can be used with AT-R Series devices
You can also save Registrations
in a folder. Refer to “Saving
Registrations in a folder” (p.
105).
AT-500_e.book 104 ページ ２００８年７月２８日 月曜日 午後４時１７分