Roland ATELIER AT-500 - Manual (Page 71)

69
Selecting and Playing Sounds
Selecting and Playing Sounds
You can choose the type of Manual Percussion Set.
When you change the Manual Percussion Set, the sound played by each of
the 15 lowest notes of the Lower keyboard will change.
Immediately after the power is turned on, the PERC SET1 drum set will sound.
1.
Press the [Manual Percussion] button (indicator lights).
The Manual Percussion screen will be displayed for several seconds.
fig.01-36-1.eps
2.
While the Manual Percussion screen is displayed, touch a
manual percussion set name in the screen.
The [Manual Percussion] button indicator will begin to flash.
You can select from 6 different Manual Percussion Sets;
3.
Press the [Manual Percussion] button once again.
The [Manual Percussion] button indicator will change from blinking to lit, and
your choice of drum set will be finalized.
Changing the Manual Percussion Sets
Manual Percussion Set
PERC SET 1, PERC SET 2, ORCHESTRA SET, LATIN SET, VOICE PHRASE, SFX SET
Refer to “Manual Percussion
List” (Appendix: separate
booklet) for details on which
percussion sound will be
played by each note.
NOTE
The Manual Percussion screen
will automatically close after
several seconds if you do not
touch the screen to select a
manual percussion set. If you
wish to change the manual
percussion set, you must select
a manual percussion set quickly
while the manual percussion
screen is displayed.
You can also confirm the
Manual Percussion set by
touching <Exit> in the Manual
Percussion screen.
You can also play the lower
manual to confirm the manual
percussion set.
AT-500_e.book 69 ページ ２００８年７月２８日 月曜日 午後４時１７分