Roland ATELIER AT-500 - Manual (Page 216)

214
Various Other Settings
You can set the main screen so that the bouncing ball does not
appear.
1. Touch <System> on the Main screen.
The System screen appears.
2. Touch < > < > to display the Main
Bouncing Ball.
fig.09-44.eps
3. Touch the Main Bouncing Ball setting to switch
between “ON” and “OFF.”
Each time you touch the Main Bouncing Ball setting, it
will alternate between “ON” and “OFF.”
4. Touch <Exit>.
This setting remains stored in memory even while power is
turned off.
You can change the color and pattern for the main screen’s
background.
1. Touch <System> on the Main screen.
The System screen appears.
2. Touch < > < > to display the Main
Background.
fig.09-44.eps
3. Touch the Main Background setting.
4. Touch < > < > to change the setting.
fig.10-13.eps
5. Touch <Exit>.
The System screen appears.
6. Touch <Exit> on the System Screen.
The main screen appears with the selected background.
This setting remains stored in memory even while power is
turned off.
Eliminating the Bouncing Ball from the
Main Screen
Setting Description
ON The bouncing ball appears in the main screen.
OFF
The bouncing ball does not appear in the main
screen.
Switching the Background of the Main
Screen
AT-500_e.book 214 ページ ２００８年７月２８日 月曜日 午後４時１７分