Roland ATELIER AT-500 - Manual (Page 132)

130
Applying Various Effects to the Sound
This setting allows you to choose the brightness of the Rotary
sound obtained when using the Rotary effect (p. 128).
1. Touch <Sound/KBD> on the Main screen.
fig.05-08.eps
The Sound/Keyboard screen appears.
fig.VoiceList.eps
2. Touch <Effect>.
The Effect screen appears.
fig.05-17.eps
3. Touch < > < > to display the Rotary Color.
4. Touch the value setting buttons for Rotary
Color to adjust the setting.
Each time you touch the Rotary Color setting, it will
switch between “BRIGHT” and “MELLOW.”
5. Touch <Exit>.
These settings remain stored in memory even while the
power is off.
Changing the Brightness of the Rotary
Effect (Rotary Color)
Setting
BRIGHT, MELLOW
AT-500_e.book 130 ページ ２００８年７月２８日 月曜日 午後４時１７分