Roland ATELIER AT-500 - Manual (Page 29)

27
Before You Start Playing
Before You Start Playing
Attach the floppy disk drive as shown the figure, using the
mounting holes on the ATELIER’s bottom panel.
For details of the attachment, refer to the owner’s manual of
the floppy disk drive.
1. Connect the USB cable of the floppy disk drive
to the ATELIER’s Ext Drive connector.
Connecting the Floppy Disk Drive
Ext Drive
Connector
USB Cable
AT-500_e.book 27 ページ ２００８年７月２８日 月曜日 午後４時１７分