Roland ATELIER AT-500 - Manual (Page 122)

120
Using the Performance Functions
On either side of the expression pedal are two Foot Switches. Different
functions are assigned to each of these two foot switches.
fig.04-07.eps
You can also change the functions assigned to the left and right Foot Switches.
Please refer to “Changing the Function of the Foot Switch” (p. 121).
With the factory settings, the following functions are assigned to the left and
right Foot Switches.
You can store functions to be assigned to the foot switch to individual
Registration buttons (p. 97).
Using the Foot Switches
Right Foot Switch
Switch the Rotary effect between Fast/Slow.
If Rotary is turned on, the Rotary effect will switch between
“Fast” and “Slow” each time you press the Foot Switch.
Left Foot Switch
Glide (an effect by which the pitch is lowered by a semitone
while the foot switch is pressed, and is returned to what is
originally was when you release your foot).
While you are pressing the Foot Switch, the pitch will be
temporarily lowered. When you release the Foot Switch, the
pitch will return to normal gradually.
NOTE
If “Registration Shift” is turned
“RIGHT,” “LEFT,” or “RIGHT
+Load Next,” the foot switch
will function only to switch
Registrations (p. 122).
The Glide effect will only be
applied to the keyboard section
that has been specified as
being the destination for the
Pitch bend/Vibrato lever.
Please refer to “Choosing the
Keyboard for which Pitch Bend
and Vibrato will Apply” (p.
200).
AT-500_e.book 120 ページ ２００８年７月２８日 月曜日 午後４時１７分