TechniSat DigiCorder S2 - Manual (Page 104)

Connection to PC via host to host
cable
LNB power supply:
LNB current
2 x 400 mA max.; double insulated
LNB voltage vertical <14,0V no load, > 11,5 V at 400
mA
LNB voltage horizontal < 20 V no load, > 17,2 V at 400
mA
LNB switched off in stand-by mode
22 kHz modulation: 22 kHz, Amplitude 0.6 V +/- 0.2 V
Programme memory/satellite positions:
No. of programmes Favourites list TV:
2000 TV programmes
No. of programmes Favourites list Radio:
2000 RADIO programmes
Number of programmes:
Total list TV/Radio:
Total of 6000 programmes possi-
ble in Total list
DiSEqC:
DiSEqC 1.0 and DiSEqC 1.2
SFI data:
SFI preview:
maximum 7 days in advance
Timer:
Events:
maximum 124 events, one year in
advance
Remote control system: RC-5
Sub-system address 8 (SAT 1), 10 (SAT 2)
Modulation frequency 36 kHz
Infra-red wavelength 950 nm
Power supply:
Mains adapter plug:
Power consumption:
< 1 W
in stand-by mode (stand-by LED)
< 2,5 W* in stand-by mode (stand-by clock)
14 W Operation (without LNB, without
hard drive)
50 W Recording mode / 400mA LNB
power, connected USB and 2 CI
modules inserted
*) not applicable during SFI update
Nominal voltage:
230 V / 50 Hz alternating current
Input voltage:
180 V.... 250 V / 50 Hz alternating current
General:
Dimension (WxDxH):
370 mm x 220 mm x 65 mm
Weight: approx. 2,7 kg
104
BED_ANL_DIGICORDER_S2_28/03.QXD 30.03.2006 11:38 Uhr Seite 104