TechniSat DigiCorder S2 - Manual (Page 34)

7.10 Transponder information
> Call up the navigator by pressing OK.
> Use the arrow keys to mark the programme you
wish to display.
> Press the Option key to display the data of the trans-
ponder selected (Fig. 7-14).
> In addition, you can use the coloured function keys to
display Audio/Video information, Programme
information, and, where available, information on the
Encryption system (CA) in use.
> Press the Menu key to exit the information function.
7.11 Freeze frame
> Press the Freeze frame key, and the current moving
TV picture will be frozen, and displayed as a still pictu-
re.
> Press this key again to return to normal operation.
7.12 Videotext
7.12.1 Using the videotext decoder of your televi-
sion set
Where broadcast, videotext will be made available to your
television set. To operate the videotext options, you must use
the remote control of your television set. If there should be
any probelms related to the display on your television screen,
such as an overlapping of videotext contents and picture, you
should set your digital receiver to FBAS mode (Point 6.3.4).
7.12.2 Using the internal videotext decoder
As an alternative, you can also use the integrated TOP video-
text decoder to display the information. When using TOP
videotext, all text pages are split thematically into groups and
blocks, which makes the videotext more readable.
> Switch to the channel for which you wish to see the
videotext information.
> Press the Videotext key to display the videotext
(Fig. 7-15).
34
(Fig. 7-14)
VT group VT block
(Fig. 7-15)
BED_ANL_DIGICORDER_S2_28/03.QXD 30.03.2006 11:37 Uhr Seite 34