TechniSat DigiCorder S2 - Manual (Page 36)

7.14 PIP function (picture in picture)
Your receiver is equipped with a so-called PIP function. This
allows you to view a second, smaller picture (PIP picture) wit-
hin the larger main picture.
> Press the PIP key to switch on the picture in picture
mode (Fig. 7-16).
The current main picture, which can be sourced either
from a TV programme or from a hard drive recording,
will be displayed as a small (PIP) picture in the upper
right corner, and the TV programme last viewed will be
displayed as the main picture.
The soundtrack of the main picture will always be
reproduced when in PIP mode.
> Press the Back key to exchange the two pictures.
The PIP picture will be displayed as the main picture,
and vice versa.
> To switch off the picture in picture mode, press the
PIP key again.
7.15 Electronic Programme Guide SFI
(S SiehF Fern IInfo)
Your digital receiver features an electronic programme guide.
This allows you to display programme information related to
one or more programmes on your screen.
You can very quickly obtain an overview of the currently run-
ning programmes, the programmes of the day or those of the
following days.
The SFI functions allow you to:
- display information on programme contents on screen
- mark specific programmes that will then be automati-
cally switched on when the programme begins
- programme timers
- search for and view programmes according to the pro-
gramme type (genre).
36
(Fig. 7-16)
Main picture PIP image
BED_ANL_DIGICORDER_S2_28/03.QXD 30.03.2006 11:37 Uhr Seite 36