TechniSat DigiCorder S2 - Manual (Page 78)

> Use the arrow keys up/down to select the desired
programme list type (e.g. Favourites lists).
> Confirm by pressing OK.
If the option of various Favourites lists was activated
under Point 6.5.1, a selection window showing the
various Favourites lists will be displayed.
> Use the arrow keys to mark a channel you wish to
include in the electronic programme guide.
> Press the yellow function key SFI to include the
marked channel in the electronic programme guide,
resp. to remove it from the programme guide.
> To include several channels in the electronic program-
me guide simultaneously, mark these as described in
9.1.4 (Marking blocks).
> When you have completed marking the desired chan-
nels in this manner, press the yellow function key
SFI to accept the marked programmes into the elec-
tronic programme guide.
> Press the Menu key to return to normal operation.
You can now start the downloading procedure manually:
> Switch the receiver off using the On/Stand-by key
(Stand-by).
> Now, while the message „Load SFI?“ is shown in the
display, press the SFI key.
The receiver will now perform the download procedu-
re. This will be shown by the message Loading SFI
as well as an indication of the SFI data already down-
loaded in the display panel.
> The downloading procedure can be interrupted by
switching the digital receiver on (On/Stand-by key).
9.2.6 Selecting radio channels/programmes
Use the same procedure as described in Point 9.2.5 to inclu-
de radio channels/stations in the programme guide.
78
BED_ANL_DIGICORDER_S2_28/03.QXD 30.03.2006 11:38 Uhr Seite 78