TechniSat DigiCorder S2 - Manual (Page 22)

Use the arrow keys left/right to switch the Dolby
Digital function on or off.
If the Dolby Digital (AC3) function is switched on, these bro-
adcasts will automatically be reproduced in Dolby Digital for-
mat.
If the function is not switched on (off), Dolby Digital sound
can also be switched on manually. Please also note Point
7.5.1 of the operating manual.
Accepting/storing settings
To store the settings made in this menu, please proceed as
follows:
> Press the green function key Accept to store the
changes made, and return to the menu Settings.
alternatively:
> Press the red function key Back.
A query window will be displayed (Fig. 6-7).
> If you wish to accept and store the changes, use the
arrow keys left/right to mark the field Yes, and
confirm by pressing OK.
You will now be returned to the previous menu.
> Press the TV/Radio key to return to normal opera-
tion.
In this case the settings will not be stored.
6.4 Antenna settings
Once you have set the digital receiver to your own individual
preferences, it may still be necessary to adjust the digital
receiver to your antenna. The menu Antenna settings
lists the satellites set in terms of the installation assistant. If
the installation assistant was prematurely terminated, the
satellite positions ASTRA and EUTELSAT will be pre-pro-
grammed. If you also wish to receive other satellites, or if you
are using a different LNB, set your digital receiver to the des-
ired data as follows:
> Use the Menu key to call up the Main Menu.
(Fig. 6-8)
> Use the arrow keys up/down to mark the line
Settings.
> Confirm by pressing OK.
The menu Settings will be displayed. (Fig. 6-9)
> Now use the arrow keys up/down to mark the line
Antenna settings.
Confirm by pressing OK. The menu Antenna set-
tings will be displayed.(Fig. 6-10)
The following settings can be made in this sub-menu:
22
(Fig. 6-8)
(Fig. 6-9)
(Fig. 6-7)
(Fig. 6-10)
BED_ANL_DIGICORDER_S2_28/03.QXD 30.03.2006 11:37 Uhr Seite 22