TechniSat DigiCorder S2 - Manual (Page 71)

8.3.5.1 Checking the hard drive
> To preform a check of the hard drive, use the arrow
keys left/right to mark the field Check.
> Press the OK key, then confirm the message display-
ed by pressing OK again to start the procedure.
The hard drive will now be checked. The result will be
displayed once the procedure is completed.
8.3.5.2 Formating the hard drive
When you format the hard drive, the file system will be repla-
ced. This may become necessary, if an error has been found
while checking your hard drive.
Note!
All contents of the hard drive will be erased
during formating, all existing recordings
and multi-media files (e.g. MP3’s) will be
lost.
> To format the hard drive, use the arrow keys
left/right to mark the field Format.
> Press the OK key, then confirm the message display-
ed by pressing OK again to start the formating proce-
dure.
Please note !
The receiver may be operated only with the built-in hard drive
supplied ex factory. The receiver may be damaged otherwise.
You must therefore not open the housing, and must not
exchange the hard drive yourself, as this would lead to an
immediate voiding of all guarantees.
9 Changing the basic programming
9.1 Configuring the Favourites list
This chapter describes how you may change the pre-pro-
gramming of your digital receiver as well as the Favourites
programme list in accordance with your preferences. This
function is also required to sort new programmes into the list
after a programme scan.
To work with this function, you should know the following:
your receiver features the Total list as well as four
Favourites lists., provided the function enabling several
Favourites lists has been switched on as per Point 6.5.1. The
Favourites programme lists include all the programmes you
have added as described below. The Total list includes all
programmes/channels.
71
BED_ANL_DIGICORDER_S2_28/03.QXD 30.03.2006 11:38 Uhr Seite 71