TechniSat DigiCorder S2 - Manual (Page 68)

8.3.2.3 Deleting
To delete files resp. folders proceed as follows:
> Use the red function key Set-Top-Box or the green
function key USB devices to switch to the source on
which the file or folder to be deleted is located.
> Use the arrow keys up/down to mark the file or
folder you wish to delete.
> Press the blue function key Functions to open a
window listing the functions available.
> Use the arrow keys up/down to mark the line
Delete and confirm by pressing OK.
> To delete the marked file resp. the marked folder, you
must now press the yellow function key Delete.
A query message will be displayed, asking whether
you really wish to delete the selected files.
> Use the arrow keys left/right to mark the field
Yes and confirm by pressing OK.
The data will now be deleted.
> To delete several files simultaneously, mark these as
described in Marking blocks above.
8.3.2.4 Sampling MP3 files/showing picture files
The function sample resp. show is available in this menu in
order to sample an MP3 file resp. to show a JPG file. This
function can be called up as follows:
Use the red function key Set-Top-Box or the green
function key USB devices to switch to the source on
which the file is located that you wish to sample resp.
to show.
> Use the arrow keys up/down to mark the file you
wish to sample.
> Press the blue function key Functions to open a
selection window showing the functions available.
> Use the arrow keys up/down to mark the line
Sample resp. Show and confirm by pressing OK.
> Press the yellow function key. The marked file will
now be played as a sample, resp. shown.
68
BED_ANL_DIGICORDER_S2_28/03.QXD 30.03.2006 11:38 Uhr Seite 68