TechniSat DigiCorder S2 - Manual (Page 44)

8.1 Recording
Various recording modes are available for saving recordings
to the hard drive.
1. Instant recording
Use this type of recording to record a currently running pro-
gramme immediately, with just one press of the key.
2. Timer-controlled recording
In the case of this function, your digital receiver will be swit-
ched on and off for the recording, so this can be recorded in
your absence. To do this, you can either programme the timer
manually, or automatically using the SFI function.
3. Timeshift recording
The timeshift recording mode makes it possible to provide
timeshift telvision viewing. While the programme is still being
broadcast, you can already view the recording, shifted in
time.
Please note!
To utilise all the recording facilities of your receiver, you
should ensure it is connected via two independent antenna
connections. This allows you to use the following combina-
tions of recording and playback :
Record one programme, and at the same time view
another programme being broadcast, or a hard drive
recording
Record two programmes simultaneously, even if these
are located in different ranges of the transmission
band
Record two different programmes simultaneously,
even if these are located in different ranges of the
transmission band, plus play back and view an exi-
sting hard drive recording
If only one antenna connection is available for connec-
tion to the reciever, only a limited range of recording and
playback options is available.
Record one programme, and at the same time view
another programme in the same range of the same
reception band, or view a hard drive recording.
Record two programmes on the same reception
band simultaneously.
Record two different programmes on the same
reception band simultaneously, and view an exi-
sting hard drive recording
44
BED_ANL_DIGICORDER_S2_28/03.QXD 30.03.2006 11:37 Uhr Seite 44