TechniSat DigiCorder S2 - Manual (Page 33)

7.6 TV/Radio switching
The pre-programming includes both TV and radio programes.
> Use the TV/Radio key ro switch the digital receiver
to radio mode. The receiver will now switch to the last
radio programme previously selected.
> Press the TV/Radio key again to return to the last
television programme previously selected.
7.7 Return to last programme previously selec-
ted
> Press the Back key on the remote control to return to
the last programme previously selected.
> Press the key again to return to the programme pre-
viously selected.
7.8 Display clock and programme information
This function allows you to view programme information rela-
ting to the programme currently selected.
> Press the Info key to display information for the cur-
rently selected programme (Fig. 7-12).
A display will appear on the lower half of the screen, showing
the current time, the name of the programme selected, the
name of the current programme together with its start and
stop times, whenever this information is broadcast by the pro-
gramme provider.
7.9 Additional programme information
Wherever these are provided, you can use the function pro-
gramme information to obtain additional programme informa-
tion relating to the programme selected.
> Press the Info key twice to open an additional infor-
mation window (Fig. 7-13).
Additional information relating to the current program-
me will be displayed.
> You can move around lengthy information texts one
line at a time by using the arrow keys up/down, or
one page at a time by using the arrow keys
left/right.
> Where available, pressing the Info key again will
bring up the next programme.
> Press the Info key once again to switch off the
display.
33
(Fig. 7-12)
(Fig. 7-13)
BED_ANL_DIGICORDER_S2_28/03.QXD 30.03.2006 11:37 Uhr Seite 33