TechniSat DigiCorder S2 - Manual (Page 38)

7.15.4 Now (Table with current programme con-
tents)
Initially, the SFI table “Now” (Fig. 7-17) will be displayed,
showing the programmes currently being broadcast. The yel-
low bar next to the programme name indicates the elapsed
time of the current programme. The marker indicates the pro-
gramme currently selected.
> Use the arrow keys up/down to move the marker
one line at a time.
> Use the arrow keys left/right to move through the
programme list one page at a time.
The SFI functions (Point 7.15.7) are now available.
> Press the yellow function key to go to the SFI table
“Next” (see Point 7.15.5)
or
> press the TV/Radio key to return to normal opera-
tion.
7.15.5 Next
> Use the yellow function key to call up the table
"Next" (next/following programmes)
(Fig. 7-18).
> The SFI functions (Point 7.15.7) are now available.
> Press the yellow function key to go to the SFI table
“More” (Point 7.15.6)
or
Press the green function key resp. the Back key to
return to the previous SFI table “Now”
or
> Press the TV/Radio key to return to normal opera-
tion.
38
(Fig. 7-18)
BED_ANL_DIGICORDER_S2_28/03.QXD 30.03.2006 11:37 Uhr Seite 38